51 37 261 Removing and installing/replacing window cavity cover strip for door window, rear left or right
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove roller cover for luggage compartment, refer to Owner's Manual
- Fold rear seat backrest forwards
- Remove panel for roof pillar at rear (C-pillar), see 51 43 251 Removing and installing/replacing trim panel for rear left or right roof pillar (C - pillar)
- Remove panel for roof pillar at rear (D-pillar), see 51 43 252 Replacing trim panel for rear left or right roof pillar (D-pillar)
- Release covers on seat belt at top rear, see 72 11 100 REMOVING AND INSTALLING/REPLACING REAR LEFT OR RIGHT SEAT BELTS
Release screw (1) on window cavity cover strip (2).
Remove window cavity cover strip (1) towards top.
Installation:
Guides (1) on window cavity cover strip (2) must not be damaged.