51 33 000 Removing and installing (replacing) power window unit in left or right front door
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When removing door lock, snap door window glass out only, do not remove, secure in door window frame.
Necessary preliminary tasks:
- Remove front door window glass, see 51 32 170 Removing and installing / replacing door window glass, front left or right
Unscrew nuts (1).
Feed out rear section of power window unit (2) in direction of arrow.
Installation:
Tightening torque: 51 33 2AZ, see 51 33 POWER WINDOWS, FRONT
NOTE:
The work step "Removing and installing/replace door lock" ends here.
Feed out front section of power window unit (1) with flat motor (2) in direction of arrow from front door.
Replacement:
Remove flat motor for power window unit, see 67 62 000 REMOVING AND INSTALLING / REPLACING FLAT MOTOR FOR FRONT LEFT OR RIGHT POWER WINDOW UNIT