51 24 300 Removing and installing or replacing left or right gas strut for rear lid
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Support rear lid in fully opened position with suitable apparatus. Risk of injury.
Make a written record of the installation position of the gas pressure support(s) before removing.
Slide stop spring (1) to end of gas pressure spring (2) and lever out gas pressure spring. Repeat the procedure at the other end of the gas strut (2) and remove.