51 23 160 Removing and installing/replacing arrester hook on engine hood

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Raise bonnet/hood lid.

Release screws (1) and remove arrester hook (2).

Tightening torque: 51 23 1AZ, see 51 23 HOOD/BONNET LOCKS

Fig 1: Screws And Arrester Hook

Courtesy of BMW OF NORTH AMERICA, INC.