51 22 235 Removing and installing/replacing Bowden cable for inside door opener on left or right rear door
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear door trim panel, see 51 42 000 Removing and installing left or right rear door trim panel
Unhook Bowden cable for release lever:
- Tighten release lever (1).
- Lever out lock (2).
- Detach Bowden cable (3) towards rear/top.
Installation:
For fitting, press release lever (1) fully onto door trim panel.