51 22 180 Removing and installing/replacing cover on outside handle, left or right
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Remove trim (2).
Installation:
If necessary, replace faulty trim (2).
Release screw (1).
Pull off cover (1) in direction of arrow.
Lever out catches (1) and detach cover (2) from filler element (3).
Installation:
Catches (1) of cover (2) must not be damaged.