51 12 825 Removing and installing/replacing guide for rear center bumper
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear bumper trim, see 51 12 156 Removing and installing rear bumper trim (from 09/2006)
Version with Park Distance Control:
If necessary, release cable holders (1) and lay cable to one side.
Unfasten screws (2).
Remove guide (3).
Installation:
If necessary, replace damaged cable straps (1).
Tightening torque: 51 12 10AZ, see 51 12 REAR BUMPER