51 12 080 Removing and installing/replacing trim on loading sill for rear bumper (from 09/2006)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Trim (1) is if necessary secured to bumper with double-sided adhesive tape (3).

Lever out trim (1) from bumper (2).

Installation:

Make sure trim (1) is correctly seated on bumper (2).

Fig 1: Trim And Bumper

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Engage trim (1) in bumper (2).

Fig 2: Trim And Bumper

Courtesy of BMW OF NORTH AMERICA, INC.