51 12 050 Removing and installing / replacing carrier for rear bumper trim
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove front bumper trim, see 51 11 156 Removing and installing front bumper trim (up to 09/2006)
Release nuts (1) on left and right.
Remove carrier (2).
Tightening torque: 51 12 3AZ, see 51 12 REAR BUMPER