34 11 250 Removing and installing/replacing a brake carrier/brake guard plate at front
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove front swivel bearing, see 31 21 090 REPLACING (REMOVING AND INSTALLING) LEFT OR RIGHT SWIVEL BEARING .
Release screws (1) and remove brake guard plate (2).
Installation:
Tightening torque: 34 11 5AZ, see 34 11 FRONT BRAKE .