25 11 235 Replacing bearing bushes for shift arm
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, 2007 BMW X3, and 2006 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove shift arm, see 25 11 000 Removing and installing shift lever .
Press out bearing bush (1).
Coat new bearing bush (1) with Circolight and then press into shift arm until side edges of bush protrude uniformly.