Necessary preliminary tasks

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW X5, 2010 BMW X3, 2009 BMW X5, 2009 BMW X3, and 2008 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect plug connection (1) on inlet solenoid valve (2).

Release screw (3).

NOTE: Secure support and sealing ring against falling down.

Remove inlet solenoid valve (2) with bracket towards front.

Disconnect plug connection (6) on exhaust solenoid valve (5).

Release screw (4).

Fig 1: Identifying Solenoid Valve With Plug Connection And Mounting Screws

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Secure support and sealing ring against falling down.

Remove exhaust solenoid valve (5) with bracket towards front.

Tightening torque 11 36 3AZ .

IMPORTANT: Risk of mixing up plug connections (1 and 6).

Installation: