61 67 083 Removing and installing/replacing high - pressure nozzle of left or right headlight washer system (M aerodynamic kit)

WARNING: This page is about a different car, the 2010 BMW X3, 2009 BMW X3, 2008 BMW X3, and 2007 BMW X3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

13 3 010 HOSE CLIP

Necessary preliminary tasks:

Remove cover for headlight washer system, see 1 11 ... REMOVING AND INSTALLING/REPLACING FRONT COVER FOR HEADLIGHT WASHER SYSTEM ON LEFT OR RIGHT (M TECHNIC AERODYNAMIC KIT)
Remove front bumper trim, see 51 11 156 REMOVING AND INSTALLING/REPLACING FRONT BUMPER TRIM (M TECHNIC AERODYNAMIC KIT) .

To prevent excess escape of washer fluid, seal off end of high - pressure line with special tool 13 3 010 .

Fig 1: Identifying Special Tool (13 3 010)

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock H.P. line (3) and detach from H.P. nozzle (1).

Release screws (2).

Remove H.P. nozzle (1).

Installation:

New spray nozzles are already preset.

Check function.

Fig 2: Unlocking H.P. Line

Courtesy of BMW OF NORTH AMERICA, INC.