Special tools required:
WARNING: This page is about a different car, the 2008 BMW 760Li and 2007 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
- 11 3 340. See 11 3 340 LOCKING PIN (2)
Necessary preliminary tasks:
- Remove fan clutch with fan impeller. See 11 52 020 Removing and Installing Or Replacing Fan Clutch (N73)
NOTE:
If the drive belt is to be reused: Mark direction of travel and reinstall drive belt in same direction of travel.
Secure belt tensioner in place with special tool 11 3 340. See 11 3 340 LOCKING PIN (2)
Remove drive belt.
Installation:
Check drive belt for coolant and oil residue and replace if necessary.
Ensure correct installation position: Risk of damage.