33 41 Wheel Bearings
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - WHEEL BEARINGS
| - | Type | Thread | Tightening specification | Measure |
|---|---|---|---|---|
| 1AZ Rear axle shaft to drive flange | E12, E21, E23, E24 | Collar nut yellow chromated | Replace collar nut | 435 Nm |
| - | E28 | Collar nut waxed white M22 |
Replace collar nut | 190 Nm |
| - | E23, E24, E28, E32, E34 | Collar nut waxed white M27 |
Replace collar nut | 250 Nm |
| 2AZ Bearing unit on wheel carrier | E39 | - | Replace screws | - |
| - | - | - | Jointing torque | 30 Nm |
| - | - | - | Torque angle | 90° |
| - | E60 | - | Replace screws | - |
| - | - | - | Jointing torque | 30 Nm |
| - | - | - | Torque angle | 110° |
| - | E53, E61, E63, E64, E65, E66 | - | - | 100 Nm |
| 3AZ Drive flange to axle shaft | E53, E60, E61, E63, E64, E65, E66, E67 | M27 | Replacing collar nut and lightly oil contact face | 420 Nm |
| - | E31, E36, E38, E39, E46, E52, E83, E85, E86 | M27 | Replacing collar nut and lightly oil contact face | 300 Nm |
| - | E36, E46, E85, E86 | M24 | Replacing collar nut and lightly oil contact face | 250 Nm |
| - | E30, E36 | M22 | Replacing collar nut and lightly oil contact face | 200 Nm |