LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1360 (Lights - Overview) >> Adaptive Headlights E60, E61, E63, E64, E65, E66, E70, E81, E87, E90, E91, E92, E93 >> System Functions >> Setting Headlights To Parked Position

Setting Headlights To Parked Position

WARNING: This page does not describe the selected car, but rather 94 other vehicles, including the 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, 2010 BMW Z4, and 2010 BMW X6 M. However, it is still accessible from the selected car via links, so may be relevant.

When terminal R is switched off, the headlights move to the parked position. The parked position is important for the headlights' next calibration sequence: From the parked position, the headlights are run through a calibration sequence in the pre-drive-check. During each calibration sequence, the control unit for adaptive headlights relearns the straight - ahead position for the headlights.

When the headlights have reached the parked position, the stepper motor controllers SMCs inform the control unit for adaptive headlights ("verification").

The control unit for adaptive headlights deactivates the stepper motor controllers.

The run-down period lasts approx. 10 seconds.

scientia non olet · About LEMON Manuals