51 44 011 Removing And Installing / Replacing Headliner (With Slide/Tilt Sunroof)

Special tools required: 

• 00 9 323
• 54 1 230

Necessary preliminary tasks: 

• Remove both SUN VISORS AND COUNTER SUPPORTS 
• Remove all HANDLES 
• Remove both TRIM PANELS FOR ROOF PILLAR AT FRONT  (A-pillar)
• Remove both TRIM PANELS FOR DOOR PILLAR  (B-pillar, top)
• Remove both TRIM PANELS FOR ROOF PILLAR AT REAR  (C-pillar)
• Remove REAR CONSOLE INSERT/MAKE-UP MIRROR IN REAR COMPARTMENT 
• Remove SWITCH FOR SLIDE/TILT SUNROOF
• Remove HANDS-FREE MICROPHONE
• Remove both MIRROR LIGHTS
• Remove INSERT ON FRONT CONSOLE 

F65 only: 

• Remove LEFT FRONT SEAT

E66 with rear A/C system only: 

• Remove both control elements for rear a/c system

Lever out left expander rivet (1).

Fig 1: Identifying Left Expander Rivet

Courtesy of BMW OF NORTH AMERICA, INC.

Completely open slide/tilt sunroof.

Release screws (2) on mounting frame (3).

Replacement: 

If necessary, replace nuts in headlining.

Fig 2: Identifying Mounting Frame Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Version 1: 

Slide floating roofliner (1) behind headliner (3).

Release remaining screws between mounting frame and glass sunroof cover with special tool 54 1 230  .

Release screws on mounting for bracket at rear.

Version 2: 

Connect BMW diagnosis system and Service function:

• Body
• Locking and security functions
• Slide/tilt sunroof
• Select delivery position.

Remaining screws on mounting frame are now accessible and can be released.

Fig 3: Identifying Floating Roofliner And Headliner

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Insert 2 special tools 00 9 323  between roof outer skin and water gutter. This prevents the water gutter on the roof outer skin from being twisted when the glass slide/tilt sunroof is closed.

Fig 4: Identifying Special Tool 00 9 323

Courtesy of BMW OF NORTH AMERICA, INC.

E65 only: 

Move seat back of front seat to max. rear position.

E66 only: 

Move left front seat and seat back to max. rearward/downward position.

Move right front seat and seat back to max. forward/upward position and cover seat back.

Press roofliner (1) towards rear out of metal lugs (2) and remove to left (E65) or right (E66) rear door.

Fig 5: Removing Roofliner

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Following parts of roofliner (5) must not be damaged or missing:

1. Mounting for console, front
2. Metal nuts for cover frame
3. Mounting for console, rear
4. Mounting to roof, rear

Fig 6: Identifying Roofliner Components

Courtesy of BMW OF NORTH AMERICA, INC.

If replacing version with cable to inside rearview mirror: 

Mark cutout (1) on roofliner.

A = Centre of roofliner

Up to 08/2005: 

B = 16 mm

C= 20 mm

From 09/2005: 

B = 16 mm

C= 22 mm

Fig 7: Identifying Cutout Mark On Roofliner

Courtesy of BMW OF NORTH AMERICA, INC.

Cut out cutout (1) with scalpel.

Installation: 

If necessary, use special tool 51 4 000 from E38/E39.

Installation sequence:

1. Carefully attach headliner at rear.
2. Secure roofliner at front with expansion rivet (in left counter support of sun visor)
3. Screw down grab handles at rear on left/right
4. Screw down grab handles at front on left/right
5. Screw down sun visors and counter supports
6. Screw down headliner at light aperture at front