51 12 050 Removing And Installing / Replacing Carrier For Rear Bumper Trim
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 BMW 760Li, 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 760Li, and 2007 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove BUMPER TRIM
Remove shock absorber (1) towards rear.
Release nuts (2) on left/right.
Remove carrier (3).
Tightening torque: 51 12 3AZ . See REAR BUMPER for specs.