34 41 682 Initializing Parking Brake (After Mechanical Unlocking Of Actuating Unit)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 750i, 2008 BMW 750Li, 2007 BMW 750i, 2007 BMW 750Li, and 2006 BMW 750i. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
With mechanical emergency release of actuating unit, max. torque at end stop 5 Nm.
Vehicle condition before initialization:
- Vehicle at standstill
- Ignition turned on
Touch parking brake button three times at intervals of 5 seconds.
1st touch operation:
Release position is initialized.
2nd touch operation:
Tightening of actuating unit.
Braking position is initialized.
Parking brake indicator lamp lights up red.
3rd touch operation:
Release of actuating unit.
Parking brake is ready for operation again.
Parking brake indicator lamp goes out.