11 31 Camshaft
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW 335xi, 2010 BMW 335i, 2009 BMW 335xi, 2009 BMW 335i, and 2008 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
CAMSHAFT SPECIFICATION
| - | Type | Thread | Tightening Specification | Measure | |
|---|---|---|---|---|---|
| 1AZ | Upper and lower bearing strip of camshaft (steel screw 10.9) | N54 | M7 x 70 | Insert screws dry | - |
| - | - | - | Jointing torque | 8 Nm | |
| - | - | - | Torque angle | 60° | |
| 2AZ | Chain drive module to cylinder head | N54 | M6 x 35 | - | 8.5 Nm |
| 3AZ | Guide rail to crankcase | N54 | M8 | - | 20 Nm |
| 4AZ | Guide rail to cylinder head | N54 | M7 | - | 14 Nm |
| 5AZ | Chain tensioner to cylinder head | N54 | M22 x 1.5 | Replace sealing ring | 55 Nm |
| 6AZ | Screw plug in cylinder head | N54 | M18 x 1.5 | - | 25 Nm |