11 23 Vibration Damper
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW 335xi, 2010 BMW 335i, 2009 BMW 335xi, 2009 BMW 335i, and 2008 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
VIBRATION DAMPER SPECIFICATION
| - | Type | Thread | Tightening Specification | Measure | |
|---|---|---|---|---|---|
| 3AZ | Belt pulley / vibration damper to hub | S38/B36 | M8 10.9 | - | 34 Nm |
| - | N40/N42/N45/N46/S38/B38 | M8 10.9 | - | 34 Nm | |
| - | All / others | M8 | - | 22 Nm | |
| 4AZ | Belt pulley to vibration damper | S38/B35 | M8 8.8 | - | 22 Nm |
| - | S50 | M8 8.8 | - | 22 Nm | |
| 5AZ | Sprocket with hub or hub to crankshaft | M40 | M16 x 1.5 | Replace screw | 310 Nm |
| - | M42/M43/M43TU/M44 | M16 x 1.5 | Replace screw | 330 Nm | |
| 6AZ | Hub to crankshaft | N40/N42/N45/N46 | M16 x 1.5 | Replace screw | 300 Nm |
VIBRATION DAMPER SPECIFICATION
| - | Type | Thread | Tightening Specification | Measure | |
|---|---|---|---|---|---|
| 1AZ | Torsion damper to crankshaft hub | N54 | M8 x 20 | - | 25 Nm |