11 21 Crankshaft and Bearings
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW 335xi, 2010 BMW 335i, 2009 BMW 335xi, 2009 BMW 335i, and 2008 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
CRANKSHAFT SPECIFICATION
| - | Type | Thread | Tightening Specification | Measure | |
|---|---|---|---|---|---|
| 1AZ | Increment wheel on crankshaft | S54 | M5 10.9 | Replace screws | - |
| - | - | - | Jointing torque | 5.0 Nm | |
| - | - | - | Torque angle | 45° | |
| Increment wheel on crankshaft | - | M5 10.9 | Replace screws | 13 Nm | |
| Increment wheel on crankshaft | - | M5 8.8 | Replace screws | 5.5 Nm | |
CRANKSHAFT SPECIFICATION
| - | Type | Thread | Tightening Specification | Measure | |
|---|---|---|---|---|---|
| 1AZ | Torsion damper (hub) to crankshaft (central bolt 12.9) | N54 | M16 x 80 | Replace screws Lightly oil screws and threads |
- |
| - | - | - | Jointing torque | 100 Nm | |
| - | - | - | Torque angle | 360° | |