11 11 Engine Block, Cylinder Crankcase N54 B30
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW 335xi, 2010 BMW 335i, 2009 BMW 335xi, 2009 BMW 335i, and 2008 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE TECHNICAL DATA SPECIFICATION - ENGINE BLOCK
| Bore Ø stage 0 (1) | mm | 84.000+0.014 | ||
| Bore Ø stage 00 (1) | mm | - | ||
| Bore Ø stage 1 (1) | mm | 84.250+0.014 | ||
| Permitted out-of-round of cylinder bore a) | mm | 0.005 | ||
| Permitted conicity of cylinder bore a) | mm | 0.01 | ||
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.15 | ||
|
||||