23 2 060 Rillex ball bearing extractor 6306

WARNING: This page is about a different car, the 2007 BMW 550i and 2006 BMW 550i. However, it is still accessible from the selected car via links, so may be relevant.

Note: For removing deep groove ball bearing of input and output shaft

Transmission: 242/4, 262/4

Order number: 23 2 060

Rillex ball bearing extractor 6306

Consisting of:

1 = 23 2 061 Claw for Rillex 6306 (8)

2 = 23 2 062 Union sleeve

3 = 23 2 063 Pressure spindle

Fig 1: Identifying Support (23 0 060)

Courtesy of BMW OF NORTH AMERICA, INC.