33 55 041 Replacing Anti-Roll Bar Link For Anti-Roll Bar On Left Or Right

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW 535xi, 2010 BMW 528xi, 2009 BMW 535xi, 2009 BMW 528xi, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.

Release nut (1); if necessary, grip at Torx socket. Installation note: Replace self-locking nut. Tightening torque 33 55 2AZ

Fig 1: Identifying Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Release nut (2); if necessary, grip at Torx socket. Remove anti-roll bar link. Installation note: Replace self-locking nut. Tightening torque 33 55 2AZ .