LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1298 (Rear Axle - Repair (AWD)) >> 10 Final Drive >> 00 11 259 Oil Change In Rear Differential Incl. Used Oil Disposal

00 11 259 Oil Change In Rear Differential Incl. Used Oil Disposal

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW 535xi, 2010 BMW 528xi, 2009 BMW 535xi, 2009 BMW 528xi, and 2008 BMW 535xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Risk of damage!
To avoid serious damage to the rear differential, it is essential to use only approved transmission oils in the differential.
NOTE: The oil does not need to be changed in rear differentials carrying the "Life-Time-Oil" sticker.
Only change oil when rear differential is at normal operating temperature.

Recycling: 

Catch and dispose of emerging differential oil.

Observe country-specific waste-disposal regulations

Oil drain plug present: 

Place oil collecting apparatus underneath.

Remove oil drain plug (1).

Drain and dispose of differential oil.

Undo oil filler plug (2).

Add differential oil up to lower edge of opening for oil filler plug (2); if necessary.

Fig 1: Identifying Oil Drain Plug
G04739599Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

  1. Oil drain or oil filler plug with sealing ring:

    Replace sealing ring (1).

    Tightening torque 33 11 3AZ .

  2. Oil drain or oil filler plug with O-ring:

    Replace oil drain or oil filler plug (2).

    Tightening torque 33 11 9AZ. .

    Fig 2: Identifying Oil Filler Plug With Sealing Ring
    G04739597Courtesy of BMW OF NORTH AMERICA, INC.

No oil drain plug: 

Undo oil filler plug (1).

Drain and dispose of differential oil.

Add differential oil up to lower edge of opening for oil filler plug (1); if necessary.

Fig 3: Identifying Oil Filler Plug
G04739601Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

  1. Oil filler plug with sealing ring:

    Replace sealing ring (1).

    Tightening torque 33 11 3AZ .

  2. Oil filler plug with O-ring:

    Replace oil filler plug (2).

    Tightening torque 33 11 9AZ .

    Fig 4: Identifying Oil Filler Plug With Sealing Ring
    G04739597Courtesy of BMW OF NORTH AMERICA, INC.