63 21 057 Replacing a socket housing for left or right rear light (on bumper trim)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear bumper trim . See 51 12 156 REMOVING AND INSTALLING REAR BUMPER TRIM .
Turn associated socket housing and remove from rear light (3).
- Socket housing of bulb for rear fog light
- Socket housing of bulb for reversing light
Cut associated two-core lead with sufficient residual length remaining in vehicle and remove socket housing.
Installation:
Wiring is carried out with connectors.