63 13 200 Removing and installing/replacing front left or right auxiliary turn signal lamp
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
Slide front auxiliary turn signal lamp (1) with trim strip (2) towards rear and fold out in direction of arrow from front side panel (3).
Remove trim strip (1) from front auxiliary turn signal lamp (2).
Unfasten plug connection (3) and disconnect.
Remove front auxiliary turn signal lamp (2).
Installation:
Make sure trim strip (1) is correctly seated on front auxiliary turn signal lamp (2).
Fixtures (3), guide (4) and tab (5) must not be damaged.
Replacement:
If necessary, change bulb .