62 30 005 Removing and installing/replacing trim for head-up display

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317 (Trim Wedge)

Lever out trim for head-up display (1) with special tool 00 9 317 from mounting points (2).

Feed trim for head-up display (1) in direction of arrow out of instrument panel trim (2) and remove.

Fig 1: Levering Out Trim With Special Tool

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure retaining lugs (1) of trim for head-up display (2) are correctly seated.

Fig 2: Ensuring Retaining Lugs (1) Of Trim For Head-Up Display (2) Are Correctly Seated

Courtesy of BMW OF NORTH AMERICA, INC.