61 12 067 Replacing Wiring Harness For Rear Bumper
WARNING: This page is about a different car, the 2010 BMW 650i, 2009 BMW 650i, 2008 BMW 650i, 2007 BMW 650i, and 2006 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Partially remove luggage compartment wheel arch trim on left . See 51 47 151 REMOVING AND INSTALLING/REPLACING LEFT LUGGAGE COMPARTMENT WHEEL ARCH TRIM
- Remove rear bumper trim . See 51 12 156 REMOVING AND INSTALLING REAR BUMPER TRIM
Unlock and disconnect plug connections (1) from ultrasonic converter.
Unlock and disconnect plug connections (2) on number/license plate lights.
Unlock and disconnect plug connections (3) from rear lights.
Installation:
Make sure wiring harness is correctly laid.