61 12 065 Replacing Wiring Harness For Front Bumper

WARNING: This page is about a different car, the 2010 BMW 650i, 2009 BMW 650i, 2008 BMW 650i, 2007 BMW 650i, and 2006 BMW 650i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove front bumper trim . See 51 11 156 REMOVING AND INSTALLING FRONT BUMPER TRIM

Disconnect plug connections (1) on ultrasonic transducer.

Unclip wiring harness (2) from bumper trim.

Fig 1: Identifying Plug Connections & Wiring Harness

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug (1) in direction of arrow from bumper trim.

Installation:

Make sure wiring harness (2) is correctly laid.

Fig 2: Identifying Wiring Harness & Plug

Courtesy of BMW OF NORTH AMERICA, INC.