52 14 025 Removing and installing/replacing seat mechanism on left or right front seat (normal/electric)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 61 2 071
- 61 2 074 . See GENERAL ELECTRICAL SYSTEM - SPECIAL TOOLS
Carry out following tasks beforehand:
- Remove seat pan and flexmat on front seat .
- Remove backrest frame on front seat .
- Remove seat belt tensioner .
Release screw (1) and cable holder (3).
Remove retaining bracket (2) with seat wiring harness from seat mechanism (4).
Attach cable 61 2 074 to cable 61 2 071 and connect plug connection (1) to front seat.
Connect cable 61 2 071 to battery.
Check function.