51 47 305 Removing and installing/replacing stowage net in front footwell

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317

Build date up to 08/2005:

Detach stowage net (1) from holder (2) and remove.

If necessary, replace faulty holders (2).

Fig 1: Identifying Stowage Net And Holder

G04761174

Courtesy of BMW OF NORTH AMERICA, INC.

Build date from 09/2005:

Snap out stowage net (1) with special tool 00 9 317 in direction of arrow and remove.

Installation:

Position stowage net (1) by means of insert retainers and press into place until it can be heard to engage.

Fig 2: Snap Out Stowage Net With Special Tool

G04761175

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Replace all insert retainers (1).

Fig 3: Identifying Retainers

G04761176

Courtesy of BMW OF NORTH AMERICA, INC.