51 46 050 Removing and installing/replacing top trim on rear apron
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove luggage compartment mat.
Release protective caps (1) and screws underneath.
Lever out expander rivets (2).
Lever out trim (3) inwards/upwards.
Installation:
Replace damaged protective caps (1) and expander rivets (2).
Make sure rear lid seal is correctly seated.
Installation:
Guides (1) of trim (2) must not be damaged.