51 16 366 Removing and installing right glovebox with housing (without active knee protection)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove trim for instrument panel, bottom right . See 51 45 181 Removing and installing/replacing bottom right trim for instrument panel .
Release screws (1).
Release screws (2) and pull back right glovebox with housing (4).
Installation:
Make sure right glovebox with housing (4) is correctly seated in associated mountings.
Disconnect associated Bowden cable (3).
Unlock associated plug connections, disconnect and remove right glovebox with housing (4).