51 12 050 Removing and installing / replacing carrier for rear bumper trim
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear bumper trim
Unscrew nuts (1).
Remove carrier (2) straight towards rear.
Tightening torque 51 12 2AZ . See BODY EQUIPMENT - TIGHTENING TORQUES .