35 31 000 Removing and installing / replacing clutch pedal

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW 650i, 2009 BMW M6, 2009 BMW 650i, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove pedal trim. See 51 45 185 REMOVING AND INSTALLING/REPLACING PANEL FOR PEDALS .
Remove CAS control unit.

Check function after completing tasks.

Disconnect return spring (1).

Unclip fastener (2).

Pull out pin (3).

If necessary, disconnect over-center helper spring.

Fig 1: Identifying Return Spring, Fastener And Pin

Courtesy of BMW OF NORTH AMERICA, INC.

Press hook (1) together and pull out pin.

Installation:

Replace pin.

Remove clutch pedal.

Fig 2: Identifying Hook And Pin

Courtesy of BMW OF NORTH AMERICA, INC.