61 31 233 Removing and installing/replacing lane departure warning motor electrics (sport steering wheel)

WARNING: This page is about a different car, the 2010 BMW M5, 2009 BMW M5, 2008 BMW M5, 2007 BMW M5, and 2006 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove DECORATIVE BAR from steering wheel

Release screws (1) and remove retaining plate (2).

Tightening torque: see 2AZ in 32 33 STEERING WHEEL

Fig 1: Identifying Retaining Plate Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Release screw (2).

Release screws (3) and remove motor electrics (4) complete with electrical wires.

Installation:

Replace screws (2 and 3).

(2) Tightening torque: see 3AZ in 32 33 STEERING WHEEL
(3) Tightening torque: see 4AZ in 32 33 STEERING WHEEL

Ensure correct cable routing.

Fig 2: Identifying Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.