22 31 001 Replacing Rubber Mount For Transmission Mounting (S85)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2010 BMW M6, 2010 BMW M5, 2009 BMW M6, 2009 BMW M5, and 2008 BMW M6. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove underbody protection.
- Remove complete exhaust system. See EXHAUST SYSTEM - REPAIR .
- Remove heat shields.
- Support transmission with hydraulic lifter.
Release screws (1) and nuts (2) and remove transmission crossmember.
Remove rubber mount from transmission crossmember.
Tighten to specified torque. Transmission cross-member to body M10 thread 42 Nm; M8 thread 19 Nm. Transmission mount to transmission support bracket/transmission cross-member 19 Nm.