31 10 010 Removing and Installing/Replacing Reinforcement Plate (AWD)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 335xi, 2008 BMW 328xi, 2007 BMW 335xi, 2007 BMW 328xi, and 2006 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe SAFETY INSTRUCTIONS for raising the vehicle.
Driving without reinforcement plate is not permitted!
Release screws (1).
Remove reinforcement plate (2).
Installation:
Replace screws.
Tightening torque 31 10 3AZ. See 31 10 FRONT AXLE SUSPENSION