27 10 720 Replacing Servomotor (ATC 300)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 335xi, 2008 BMW 328xi, 2007 BMW 335xi, 2007 BMW 328xi, and 2006 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: After replacement, the "Repair" service function must be carried out with GT1.

Disconnect plugs (1 and 2).

Release screw (3) and turn resistor counterclockwise.

Tightening torque 27 00 14AZ. See 27 00 TRANSFER BOX IN GENERAL

Fig 1: Identifying Plugs And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove servomotor from transfer case.

Tightening torque 27 00 13AZ. See 27 00 TRANSFER BOX IN GENERAL

Fig 2: Identifying Screws And Servomotor From Transfer Case

Courtesy of BMW OF NORTH AMERICA, INC.