27 10 710 Replacing Classification Resistor for Servomotor (ATC 300)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 BMW 335xi, 2008 BMW 328xi, 2007 BMW 335xi, 2007 BMW 328xi, and 2006 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Delete previous resistance values when replacing the resistor.
Using BMW diagnosis system, work through test program in accordance with instructions.
Using BMW diagnosis system, work through test program in accordance with instructions.
Disconnect connector (1).
Release screw (3) and remove resistor.
Tightening torque 27 00 14AZ. See 27 00 TRANSFER BOX IN GENERAL