11 23 010 Removing and Installing Or Replacing Vibration Damper (N54)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 BMW 335xi, 2010 BMW 335i, 2009 BMW 335xi, 2009 BMW 335i, and 2008 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Detach front underbody protection.
Remove drive belt.

Release screws (1).

Tightening torque, see 11 23 1AZ in ENGINE -- TORQUE SPECIFICATIONS -- TWIN TURBO

Remove vibration damper (2).

Fig 1: Identifying Vibration Damper With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.