17 11 Radiator and Mounting Parts
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING SPECIFICATION - RADIATOR AND MOUNTING PARTS
| Type | Thread | Measure | |
|---|---|---|---|
| 1AZ Radiator to body | |||
| Self-tapping screw | All | B6.3 | 9 Nm |
| All | M6 | 10 Nm | |
| 2AZ Drain plug to radiator | All | 2.5 Nm | |
| 3AZ Temperature switch to radiator (91 °C / 99 °C) max. | All | 15 Nm | |
| 4AZ Expansion tank to body | All | 9 Nm | |
| M57TU / E65 | 4 Nm | ||
| 5AZ Radiator on module carrier | E46 | 4 + 1 Nm | |
| 6AZ Retaining plate, expansion tank, to radiator | E46 | 4 + 1 Nm | |
| 7AZ Fan cowl on radiator | E46 | 4 + 1 Nm | |
| 8AZ Plug in radiator (temperature switch omitted) | E36/7 / M54 | M14 x 1.5 | 15 Nm |
| 9AZ Mounting plate to radiator | M57TU / E65 | 4.5 Nm | |
| 10AZ Radiator bracket | All | 2.5 Nm |