12 41 Starter motor with mounting
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES - STARTER MOTOR WITH MOUNTING
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Starter motor mounting to crankcase | N52, N52K, N51, N53 | M10x85 | Replace screw | |
| Jointing torque | 20 Nm | |||
| Torque angle | 180 ° | |||
| 2AZ Starter motor mounting to crankcase | N52, N52K, N51, N53 | M10x30 | Replace screw | |
| Jointing torque | 20 Nm | |||
| Torque angle | 90 ° | |||
| 3AZ Battery positive lead to starter | N52, N52K, N51, N53 | M8 | 13 Nm |