11 62 Exhaust manifold
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES - EXHAUST MANIFOLD
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Exhaust manifold to cylinder head Coat screw connections with CRC copper paste | All | M6 | Replace nuts | 10 Nm |
| M50 / M52 / M52TU / M54 / M56 / S52 / S50 US | M7 | Replace nuts | 20 Nm | |
| All / others | M7 | Replace nuts | 15 Nm | |
| M10 | M8 | Upper row of staybolts installed with bolt cement | ||
| 23 Nm | ||||
| M21 | M8 | 12 Nm | ||
| Replace nuts Retighten after 2000 km Slacken nuts by a 1/4 turn | ||||
| 12 Nm | ||||
| M41 / M47 / M47TU / M51 / M57 / M57TU | M8 | Replace nuts | 20 Nm | |
| All / others | M8 | Replace nuts | 23 Nm |