11 22 Flywheel
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES - FLYWHEEL [N51]
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Flywheel to crankshaft (automatic transmission). | N51 | M12 x 25.5 | Replace screws. | |
| 1. Jointing torque | 30 Nm | |||
| 2. Final tightening | 125 Nm | |||
| 2AZ DM Flywheel to crankshaft (manual transmission). | N51 | M12 x 25 | Replace screws. | 120 Nm |
TIGHTENING TORQUES - FLYWHEEL [N52K]
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Hexagon screws (6 x) Flywheel to crankshaft for vehicles with SA205 (automatic transmission). |
N52K | M12 x 25.5 | Replace screws. Jointing torque and final tightening must be observed without fail. |
|
| 1. Jointing torque | 30 Nm | |||
| 2. Final tightening | 125 Nm | |||
| 2AZ ISA screws (6 x) Flywheel to crankshaft for vehicles without SA205 (automatic transmission). |
N52K | M12 x 25 | Replace screws. | 120 Nm |