11 24 Connecting Rods and Bearings
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2013 BMW 328xi, 2013 BMW 328i, 2012 BMW 328xi, 2012 BMW 328i, and 2011 BMW 328xi. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES - CONNECTING RODS AND BEARINGS [N51]
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Connecting rod bolts | N51 | M8 | Replace, wash and oil screws | |
| Jointing torque | 20 Nm | |||
| Torque angle | 70 ° |
TIGHTENING TORQUES - CONNECTING RODS AND BEARINGS [N52K]
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ ASA screws (connecting rod bolts) (12 x) Connecting rod bearing cap to connecting rod. |
N52K | M8 x 47 | Replace screw. Jointing torque and angle of rotation must be observed without fail. |
|
| Jointing torque | 20 Nm | |||
| Torque angle | 70 ° |