33 4 430 Set of tools

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2013 BMW 328i, 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 335i, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Fig 1: Set Of Tools (33 4 430) Components

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: For removing and installing front rubber mounts on rear axle carrier.

Series: E81, E87, E90, E91, E92, E93

Storage location: B49, C49

SI number: 1 15 04 (117)

Order number: 33 4 430

Set of tools

Consisting of:

1 = 33 4 431 Pull-out disk

2 = 33 4 432 Counter support

3 = 33 4 433 Draw-in disk

4 = 33 4 434 Spindle 225 mm, M16

5 = 33 4 435 Pressure nut

6 = 33 4 436 Spindle 320 mm, M18

7 = 33 4 437 Pressure nut