31 3 350 Spring holder

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2013 BMW 328i, 2012 BMW 328i, 2011 BMW 328i, 2010 BMW 335i, and 2010 BMW 328i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

In conjunction with: 31 3 340 and 31 3 360

Note: For locating coil springs during tensioning. No. 31 3 350 reserved for consecutive sub-number spring tensioner 31 3 340.

Series: E31, E36, E36/7, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E70, E81, E82, E83, E85, E86, E87, E90, E91, E92, E93, R50, R52, R53, R55, R56

Storage location: Single

SI number: 1 11 99 (438)

Order number: 31 3 350

Spring holder

Consisting of:

1 = 31 3 351 Spring retainer (2 x)

Note: For use only with repair instructions

2 = 31 3 352 Spring retainer (2 x)

Note: For use only with repair instructions

3 = 31 3 353 Spring retainer (2 x)

Note: For use only with repair instructions

4 = 31 3 354 Spring retainer ring

Note: For use only with repair instructions

5 = 31 3 355 Spring retainer

Note: For use only with repair instructions

6 = 31 3 356 Centering ring

Note: For use only with repair instructions

7 = 31 3 357 Spring retainer (2 x)

Note: For use only with repair instructions.

Fig 1: Spring Holder (31 3 350) Components And Assembly

G04739422

Courtesy of BMW OF NORTH AMERICA, INC.

In conjunction with: 31 3 340

8 = 31 3 381 Spring retainer ring

Note: For use only with repair instructions.

9 = 31 3 382 Spring retainer

Note: For use only with repair instructions.

10 = 31 3 358 Insert ring

Note: For use only with repair instructions. For insertion in spring retainer ring 31 3 354. Model series: E87

11 = 31 3 383 Spring retainer

Note: To be used with repair instructions only.